Modulift MOD 70 Spreader Beams are versatile, light weight and cost effective. The modular configuration and interchangeable components enable a Modulift Spreader Beam to be reused over many lifts. The full Spreader Beam range has capacity from 2 – 5000 tonne.
The Modulift Spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. Manufactured in the UK to the highest international standards, the MOD 70 achieves a maximum capacity of 70 tonne and spans up to 14 metres at reduced capacity.
The product is supplied with the manufacturers Declaration of Conformity including conformance to Australian Standards (AS4991) and other world leading standards. Additionally, the Modulift modular spreader range is covered by DNV type approval.
NOTE: Prior to conducting any operations with this device a lift study must be undertaken noting the capacity and tare weights of the device in its various configurations.
PRODUCT CODE: | MOD 70 |
Maximum capacity: | 70.0 tonne |
Maximum span: | 14.0 metres |
LIfting Lugs (top) suit: | 55t Grade S Safety Bow Shackle |
Load Lugs (lower) suit: | 35t Grade S Safety Bow Shackle |
PART REF. | DESCRIPTION | WEIGHT/ITEM |
P1 | End Unit | 56kg |
P2 | Drop Link | 17kg |
P3 | 4.0m Strut | 240kg |
P4 | 2.0m Strut | 136kg |
P5 | 1.0m Strut | 85kg |
P6 | 0.5m Strut | 61kg |
P7 | 55t Shackle | 40kg |
P8 | 35t Shackle | 20kg |
P9 | M20 X 65, Grade 8.8, HT Bolts, Nuts & Washers | – |