Modulift MOD 50 Spreader Beams are versatile, light weight and cost effective. The modular configuration and interchangeable components enable a Modulift Spreader Beam to be reused over many lifts. The full Spreader Beam range has capacity from 2 – 5000 tonne.
The Modulift Spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. Manufactured in the UK to the highest international standards, the MOD 50 achieves a maximum capacity of 50 tonne and spans up to 13 metres at reduced capacity.
The product is supplied with the manufacturers Declaration of Conformity including conformance to Australian Standards (AS4991) and other world leading standards. Additionally, the Modulift modular spreader range is covered by DNV type approval.
NOTE: Prior to conducting any operations with this device a lift study must be undertaken noting the capacity and tare weights of the device in its various configurations.
| PRODUCT CODE: | MOD 50 |
| Maximum capacity: | 50.0 tonne |
| Maximum span: | 13.0 metres |
| LIfting Lugs (top) suit: | 35t Grade S Safety Bow Shackle |
| Load Lugs (lower) suit: | 25t Grade S Safety Bow Shackle |
| PART REF. | DESCRIPTION | WEIGHT/ITEM |
| P1 | End Unit | 38kg |
| P2 | Drop Link | 11kg |
| P3 | 4.0m Strut | 140kg |
| P4 | 2.0m Strut | 82kg |
| P5 | 1.0m Strut | 53kg |
| P6 | 0.5m Strut | 38kg |
| P7 | 35t Shackle | 20kg |
| P8 | 25t Shackle | 14kg |
| P9 | M20 X 65, Grade 8.8, HT Bolts, Nuts & Washers | – |