MOD 24 | MODULAR SPREADER BEAM

Spreader Beam | Modulift | Benedicto Steel
Modulift | Benedicto Steel

Modulift MOD 24 Spreader Beam
Manufactured: United Kingdom
Certification: PRODDUCT IDENTIFICATION CODE(PIC)

Facebook
Twitter
LinkedIn
Email
WhatsApp
Print

Modulift MOD 24 Spreader Beams are versatile, light weight and cost effective. The modular configuration and interchangeable components enable a Modulift Spreader Beam to be reused over many lifts. The full  Spreader Beam range has capacity from 2 – 5000 tonne.

The Modulift Spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. Manufactured in the UK to the highest international standards, the MOD 24 has an assembled span ranging from 1 metres to 8 metres in 0.5 metre increments.

The product is supplied with the manufacturers Declaration of Conformity including conformance to Australian Standards (AS4991) and other world leading standards. Additionally, the Modulift modular spreader range is covered by DNV type approval.

NOTE: Prior to conducting any operations with this device a lift study must be undertaken noting the capacity and tare weights of the device in its various configurations.

 
Specifications
PRODUCT CODE:MOD 24
Maximum capacity:24.0 tonne
Maximum span:8.0 metres
LIfting Lugs (top) suit:17t Grade S Safety Bow Shackle
Load Lugs (lower) suit:12t Grade S Safety Bow Shackle
 
Component List
PART REF.DESCRIPTIONWEIGHT/ITEM
P1End Unit17kg
P2Drop Link5kg
P32.0m Strut41kg
P41.0m Strut24kg
P50.5m Strut16kg
P617t Shackle8kg
P712t Shackle5kg
P8M20 x 50, Grade 8.8 HT Bolts, Nuts & Washers
 

Components

All products mentioned in the list are subject to approval due to availability issue and discretion of supplier and client. Any variation on the specifics of the components to be used shall be reflected on the final certificate without any compromise on the quality and the requested Working Load Limit.

Warranty

Any warranty regarding the quality or performance of our products is always premised on the condition that the published strengths apply only to new, unused rope, that the mechanical equipment on which such products are used is properly designed and maintained, that such products are properly stored, handled, used, and maintained, and that such products are properly inspected on a regular basis during the period of use.

Under no circumstances shall Seller be liable for consequential or incidental damages or secondary charges, including but not limited to personal injury, labor costs, or a loss of profits, resulting from the use of said products or from said products being incorporated in or becoming a component of any other product.