Modulift MOD 12 Spreader Beams are versatile, light weight and cost effective. The modular configuration and interchangeable components enable a Modulift Spreader Beam to be reused over many lifts. The full Spreader Beam range has capacity from 2 – 5000 tonne.
The Modulift Spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. Manufactured in the UK to the highest international standards, the MOD 12 has an assembled span ranging from 0.5 metres to 6.5 metres in 0.25 metre increments.
The product is supplied with the manufacturers Declaration of Conformity including conformance to Australian Standards (AS4991) and other world leading standards. Additionally, the Modulift modular spreader range is covered by DNV type approval.
NOTE: Prior to conducting any operations with this device a lift study must be undertaken noting the capacity and tare weights of the device in its various configurations.
| PRODUCT CODE: | MOD 12 |
| Maximum capacity: | 12.0 tonne |
| Maximum span: | 6.5 metres |
| LIfting Lugs (top) suit: | 8.5t Grade S Safety Bow Shackle |
| Load Lugs (lower) suit: | 6.5t Grade S Safety Bow Shackle |
| PART REF. | DESCRIPTION | WEIGHT/ITEM |
| P1 | End Unit | 6.0kg |
| P2 | Drop Link | 1.3kg |
| P3 | 1.5m Strut | 19kg |
| P4 | 1.0m Strut | 14kg |
| P5 | 0.75m Strut | 11kg |
| P6 | 0.5m Strut | 8kg |
| P7 | 0.25m Strut | 6kg |
| P8 | 8.5t Shackle | 2.5kg |
| P9 | 6.5t Shackle | 1.5kg |
| P10 | M12 x 35, Grade 8.8, HT Bolts, Nuts & Washers | – |