MOD 110H | MODULAR SPREADER BEAM

Spreader Beam | Modulift | Benedicto Steel
Modulift | Benedicto Steel

Modulift MOD 110H Spreader Beam
Manufactured: United Kingdom
Certification: PRODDUCT IDENTIFICATION CODE(PIC)

Facebook
Twitter
LinkedIn
Email
WhatsApp
Print

Modulift MOD 110H Spreader Beams are versatile, light weight and cost effective. The modular configuration and interchangeable components enable a Modulift Spreader Beam to be reused over many lifts. The full  Spreader Beam range has capacity from 2 – 5000 tonne.

The Modulift Spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. Manufactured in the UK to the highest international standards, the MOD 110H has an assembled span ranging from 2 metres to 18 metres in 0.5 metre increments.

The product is supplied with the manufacturers Declaration of Conformity including conformance to Australian Standards (AS4991) and other world leading standards. Additionally, the Modulift modular spreader range is covered by DNV type approval.

NOTE: Prior to conducting any operations with this device a lift study must be undertaken noting the capacity and tare weights of the device in its various configurations.

 
Specifications
PRODUCT CODE:MOD 110
Maximum capacity:170.0 tonne
Maximum span:18.0 metres
LIfting Lugs (top) suit:120t Grade S Safety Bow Shackle
Load Lugs (lower) suit:85t Grade S Safety Bow Shackle
 
Component List
PART REF.DESCRIPTIONWEIGHT/ITEM
P1End Unit178kg
P2Drop Link55kg
P34.0m Strut367kg
P42.0m Strut212kg
P51.0m Strut134kg
P60.5m Strut96kg
P7120t Shackle110kg
P885t Shackle62kg
P9M20 X 65, Grade 8.8, HT Bolts, Nuts & Washers
 

Components

All products mentioned in the list are subject to approval due to availability issue and discretion of supplier and client. Any variation on the specifics of the components to be used shall be reflected on the final certificate without any compromise on the quality and the requested Working Load Limit.

Warranty

Any warranty regarding the quality or performance of our products is always premised on the condition that the published strengths apply only to new, unused rope, that the mechanical equipment on which such products are used is properly designed and maintained, that such products are properly stored, handled, used, and maintained, and that such products are properly inspected on a regular basis during the period of use.

Under no circumstances shall Seller be liable for consequential or incidental damages or secondary charges, including but not limited to personal injury, labor costs, or a loss of profits, resulting from the use of said products or from said products being incorporated in or becoming a component of any other product.