Single Leg Chain Sling with Foundry Hook
Spectrum 10
Grade 100
Color: Black
Manufactured: U.S.A.
Assembled by: Benedicto Steel
Certification: PRODDUCT IDENTIFICATION CODE(PIC)
SLING ASSEMBLY CERTIFICATE
Components
All products mentioned in the list are subject to approval due to availability issue and discretion of supplier and client. Any variation on the specifics of the components to be used shall be reflected on the final certificate without any compromise on the quality and the requested Working Load Limit.
A Grade 100 alloy steel chain sling is used for this product. You may be certain in the high quality of Crosby chain sling products because they are designed and built in the United States. It has a sling hook and measures 3 feet in length from one end to the other.
Check out our adjustable chain slings for a more adaptable choice. With Crosby’s Eliminator, you can quickly alter the sling’s length to match your lift’s specifications.
• Alloy Steel – Quenched and Tempered.
• Individually Proof Tested to values shown, with certification
• Proof Tested with 60% inside width special fixtures sized to prevent localized point leading per ASME A-952 , reference page 276.
• Each link has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby® or “CG”.
• Large inside width and length to allow additional room for sling hardware and crane hook.
• Engineered Flat for use with S-1325A coupler link.
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these links meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
• Master links are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby master links are 100% proof tested, MPI and impact tested. The tests are conducted by Crosby and 3.1 test certification is available upon request. Refer to page 164 for Crosby COLD TUFF® master links that meet the additional requirements of DNV rules for certification of lifting appliances – Loose Gea .
• 7/16” through 1-7/32” have Engineered Flat
- Suitable for use with both Grade 80 and Grade 100 chain.
- Individually Proof Tested at 2-1/2 times Working Load Limit with certification.
- Locking system that provides for simple assembly and disassembly – no special tools needed.
- 25% stronger than Grade 80.
- Meets ASTM A-952-96 standards for Grade 100 chain fittings.
- Forged Alloy Steel – Quenched and Tempered.
- Fatigue rated.
- Alloy Steel.
- Heat Treated.
- 25% stronger than Grade 80 Alloy Chain.
- Permanently embossed with CG (Crosby Group) and 10 (Grade).
- Finish – Black rust preventative coating.
- Proof Tested at 2 times the Working Load Limit with certification.
- Standard container – fiber drum.
• Forged Alloy Steel – Quenched and Tempered.
• Individually Proof Tested to 2-1/2 times the Working Load Limit with certification
• Each hook has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby.
• Suitable for use with Grade 100 and Grade 80 chain.
• Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
• “Look for the Platinum Color – Crosby Grade 100 Alloy Products.”
• Hook can be tip loaded at the reduced Working Load Limit, see below. Operator must ensure the load is retained properly in the hook.
Capacity Chart
Crosby Grade 100 WLL Chart (Single Leg)
| Chain Size |
Work Load Limit (in metric tons) |
|
| Inches | mm | 90° Angle |
| - | 6 | 1.45 |
| 1/4 (9/32) | 7 | 1.95 |
| 5/16 | 8 | 2.59 |
| 3/8 | 10 | 4 |
| 1/2 | 13 | 6.8 |
| 5/8 | 16 | 10.2 |
| 3/4 | 20 | 16 |
| 7/8 | 22 | 19.4 |
| 1 | 26 | 27 |
| 1-1/4 | 32 | 41 |
Warranty
Any warranty regarding the quality or performance of chain sling products is always premised on the condition that the published strengths apply only to new, unused rope, that the mechanical equipment on which such products are used is properly designed and maintained, that such products are properly stored, handled, used, and maintained, and that such products are properly inspected on a regular basis during the period of use.
Under no circumstances shall Seller be liable for consequential or incidental damages or secondary charges, including but not limited to personal injury, labor costs, or a loss of profits, resulting from the use of said products or from said products being incorporated in or becoming a component of any other product.