M3 CRANE CAMERA SYSTEM
NEW PRODUCT
DESIGN OVERVIEW
THE FIRST FULLY MODULAR SYSTEM, COMPATIBLE WITH TELESCOPIC AND MOBILE CRANES.
- Specifically designed for the mobile and crawler market
- Can be installed and removed within 5 minutes
- Uses high powered neodymium magnets
- The lens is auto-focus and always gives clear views of the load and surrounding area below the hook
- HD 1080p resolution
- Audio from sensor to cab
- Long range transmission 5
- Record on loop for up to 30 days
- Purpose built aluminium housing
- Multiple built in lanyard anchors
- Safety lanyard provides secondary security tethering
- Hands free operation
- Multi positional sensor for variable views
- LED indicators
- Two batteries per system
- Non hazardous battery
- 12 hour battery life 3
- Multivoltage AC and DC inputs
- Durable all-weather design, manufactured to IP67 4 rating
- -20°C to 55°C (-4°F to 131°F) operating temperature
- Optional mobile app and 4G live streaming 2
- CE and FCC Approved
- High quality industrial connectors
- Colour coded connectors
MODULAR DESIGN, COMPATIBLE ACROSS A WIDE VARIETY OF CRANES 1
WHAT’S INCLUDED?
MONITOR (M3)
The M3 is an all in one display that combines a monitor, repeater and processor in to a purpose built fast fit system.
The M3 has a HD display with built in speakers, automatic brightness control, less than 0.2 seconds of latency and multivoltage AC and DC inputs.
SIZE & WEIGHT
HEIGHT: 180mm (7.09 in) WIDTH: 265mm (10.43 in) DEPTH: 115mm (4.5 in) WEIGHT: 3300g (7.28 lbs)
SENSOR (S4)
The S4 is a 113° wide angle lens. The low profile design, tool free operation and rotatable lens allows for easy installation on any side of the hook block including in between the cheek plates.
- HD 1080p resolution
- 113° Viewing angle
- Tool free rotatable lens. Install vertically on any face of the hook block
- Omni directional audio sensor
- Permanent neodymium magnets
- Purpose built aluminium housing
- Built in lanyard anchors
- low profile design
- IP67 4
- CE and FCC approved
SIZE & WEIGHT
HEIGHT: 100mm (3.94 in) WIDTH: 75mm (2.95 in) DEPTH: 69mm (2.72 in) WEIGHT: 1250g (2.76 lbs)
TRANSMITTER (X2)
X2 dramatically improves the most important aspects of the BlokCam. The combination of performance, specification, aesthetics and 71mm low profile design make this a must for all crane operations.
- Audio from hook to cab
- Record
- Permanent neodymium magnets
- High quality industrial connectors
- Long range transmission5
- Purpose built aluminium housing
- Multiple lanyard anchors
- 71mm low profile
- 4G live streaming 2
- Mobile app
- LED indicators
- IP67 4
SIZE & WEIGHT
HEIGHT: 128mm (5.04 in) WIDTH: 170mm (6.69 in) DEPTH: 71mm (2.8 in) WEIGHT: 2100g (4.63 lbs)
BATTERY (B5)
B5 is a non hazardous 19.2v Battery Pack. The clever tool-free design and easy grip finger slots makes it easy to install, remove and charge.
- Two Batteries with every system
- Permanent neodymium magnets
- Purpose built aluminium housing
- Easy grip finger slots
- Easy to install, remove and charge
- Easy access fuse
- Multiple lanyard anchors
- Compatible with our BlokCam Charging Station (CS1)
- 71mm low profile
- Non hazardous
- 12 hour operating time 3
- IP67
SIZE & WEIGHT
HEIGHT: 155mm (6.11 in) WIDTH: 105mm (4.1 in) DEPTH: 71mm (2.8 in) WEIGHT: 2,400g (5.29 lbs)
CHARGING STATION (CS1)
Our Charging Station is designed to improve the efficiency of your BlokCam Batteries and the performance of the camera system.
- Purpose built aluminium housing
- Multi voltage DC input
- LED Charge indicator
- Drainage slots
- Non slip rubber foot pads
- Colour coded input for fool proof installation
SIZE & WEIGHT
HEIGHT: 85mm (3.35 in) WIDTH: 150mm (5.9 in) DEPTH: 100mm (3.94 in) WEIGHT: 1,650g (3.64 lbs)
1. Subject to Crane Make/Model.
2. Subject to availability of a suitable mobile network, data charges apply.
3. Battery life varies by use and configuration.
4. IP67 rating excludes IP65 audio sensor.
5. Transmission distance may vary depending on environment.
*Actual product may differ from rendered image.